FEATURES
- Full-time 4WD 1/10 scale off-road truck kit – you build yourself!
- Formed steel C-channel chassis rails
- Front and rear bumper mounts to fit bumpers of your choice
- Adjustable rock rail side sliders help the truck get over tough obstacles
- Front-mount motor and transmission position for ultimate scale realism
- Front weight bias improves climbing traction and provides more realistic driving
- All-metal gear drivetrain for extreme durability
- Central transfer case with slider driveshafts to front and rear differentials
- Transfer case prevents motor stall for the best climbing action
- Transfer case also straightens & lowers center driveshafts for more efficient power transfer
- Axles feature small diff case or “pumpkin” size for best possible ground clearance
- Aluminum differential pumpkin covers
- Locked differentials for superb off-road climbing traction
- 12mm aluminum hex hubs to fit any available crawler wheels
- Shock towers have multiple mounting positions to allow for wheelbase options
- BTA (Behind The Axle) steering linkage for improved approach and departure angles
- Panhard bar for scale looks and optimized geometry with zero bump steer
- Zero Ackermann high steer knuckle design for improved obstacle clearance and tighter turning radius
- 3-link front triangulated suspension
- 4-link rear triangulated suspension
- Oil-filled aluminum coil-over shock absorbers (63-90mm stroke)
- Adjustable threaded shock bodies for quick ride height changes
- Dual-stage shock springs
- Aluminum lower link/shock mounts
- Aluminum Panhard mounts
- CMS (Chassis Mounted Servo) realistic steering setup
- Adjustable body mounting to fit any style of off-road body (truck or SUV)
- Fully braced rear body mounts
- Full set of ball bearings
- Protective case for receiver
- Antenna mount
SPECIFICATION
DIMENSIONS
with #117365 FJ Cruiser body and #116852 & #116853 bumper Type 1 sets
- Length: 527mm (20.7″)
- Width: 227mm (9″)
- Height: 238mm (9.4″) with roof rack, 217mm (8.5″) without (will vary depending on tire choice and suspension settings)
- Wheelbase: 311mm (12.3″)
- Front overhang: 101mm (3.9″)
- Rear overhang: 135mm (5.3″)
WEIGHT
- Running weight: 2.4kg (5.3lbs) (approximate – will vary depending on your choice of electronics)
CAPABILITY
with #116852 & #116853 bumper Type 1 sets – will vary depending on your choice of bumpers
- Break-over angle: 44.5 degrees
- Approach angle: 55 deg
- Departure angle: 45.5 deg
- Max climb angle: 49 deg
- Max tilt angle: 28 deg
- Axle articulation: 30 deg
- Ground clearance 68mm capable: (2.7″)
- Ground clearance at standard ride height 60mm: (2.4″)
- Axle ground clearance 32mm: (1.3″)
GEARING
- Drivetrain ratio: 7.6:1
- Transmission gearing: 1.53:1
- Axle gearing: 3.31:1
- Transfer case gearing: 1.5:1
Valoraciones
No hay valoraciones aún.